Lists
| Des. | Article no. |
Cutting range | Cutting speed | Pressure Mpa(Kgf/cm 3 ) | Consumption (m 3 /h) | Kerf Width (mm) |
||||
|---|---|---|---|---|---|---|---|---|---|---|
| mm | mm/min. | Cutting O 2 |
Heating O 2 |
Acetylene | Cutting O 2 |
Heating O 2 |
Acetylene | |||
| 00 | DB11285B | 0-5 | 660 | 0.15(1.5) | 0.15(1.5) | 0.02(0.2) | 0.69 | 0.41 | 0.37 | 1 |
| 0 | DB11285C | 5-10 | 660-550 | 0.2(2.0) | 0.2(2.0) | 1.2 | 1.3-1.5 | |||
| 1 | DB11285D | 10-15 | 550-490 | 0.25(2.5) | 0.25(2.5) | 2.1 | 0.48 | 0.43 | 1.7-1.8 | |
| 2 | DB11285E | 15-30 | 490-400 | 0.3(3) | 0.3(3) | 3.4 | 2.0-2.1 | |||
| 3 | DB11285F | 30-40 | 400-350 | 4.3 | 2.3-2.4 | |||||
| 4 | DB11285G | 40-50 | 350-320 | 0.35(3.5) | 0.35(3.5) | 0.025(0.25) | 6.5 | 0.55 | 0.5 | 2.7-2.9 |
| 5 | DB11285H | 50-100 | 320-200 | 0.4(4.0) | 0.4(4.0) | 0.03(0.3) | 11 | 0.69 | 0.63 | 3.4-3.5 |
| 6 | DB11285J | 100-150 | 200-150 | 0.035(0.35) | 15 | 0.77 | 0.7 | 3.9-4.0 | ||
| 7 | DB11285K | 150-250 | 150-80 | 0.45(4.5) | 0.45(4.5) | 0.04(0.4) | 22 | 1.06 | 0.96 | 4.4-5.1 |
| 8 | DB11285L | 250-300 | 80-45 | 28 | 5.8-6.8 | |||||
