LASERTEX-20/40/60Z

KOIKE original CO2 Laser Cutting Machine in which the Oscillator is mounted on the carriage. Even if LASERTEX fixed optical path length device is not used, the optical path length is kept fixed, providing stable beam transmission and cutting quality.

Original KOIKE's structure of Σ box and oscillator mounted on carriage provides Stable Optical Axis and Optimum Path Length improving the cutting performance.

The Σ box (KOIKE patented technology) fixes the optical components of the optical path in the fixed cox, avoiding any influence, such as deflection of structure.

The pressurized clean air structure protects the optical component from becoming dirty, keeping the internal environment clean for a long period, which not only stabilizes the optical axis but also suppresses the power loss to improve the overall efficiency of the CO₂ laser cutting machine.

After the cutting is completed, the dry running is started while the torch is raising, then the torch will start lowering just before reaching the next piercing point(Frog control), reducing the time required for movement. 

Torch Up/Down movement is improved, corresponding to the optimal position distance, reducing the risk of nozzle/torch the steel plate.

Moreover, due to the improvement of sequence, the piercing operation was speed up, which contributed with the improvement of productivity on the process of small parts and parts with large quantities of hole piercing.

• Shortened time of external light axis adjustment in the Σ box.
• Corresponds to wide span in Σ box.
• Optical axis deviation relieved for mounted oscillator.
• The torch Up/Down speed was increased to 20m/min.
• Productivity improvement by optimization of frog control.
• 3 types of piercing methods available, suiting up each application.